Radial Component Lead Trimming Machine – C053
- Category: Lead Trimmers
- Manufacturer: Streckfuss
Designed to cut the leads of loose radial components with lead diameters up to .032″. The machine is supplied with a .118″ thick shear plate having pre-drilled hole patterns. A .080″ thick spacer plate is supplied over one of two grid patterns.
About the Radial Component Lead Trimming Machine – C053
The C053 lead trimmer utilizes two precision drilled plates with the cutting action performed by displacing the bottom plate approximately .100". Components are hand fed into the machine with the leads extending through the appropriate hole pattern. Slots located along the edge of the plates spanning from .200" to .600" are also provided. Once the component is seated against the shear plate the foot pedal is depressed and the cutting plate is displaced cutting all the leads evenly and in a single motion.
| Production Rate: | 500 - 1000 pcs/hr |
| Dimensions: | 5.0" W x 12.0" Lx 4.5" H |
| Pneumatic Requirement: | 60 - 80 psi |
| Pre-Drilled & Hardened @ .118" Thickness (Custom Patterns Upon Request) |