Hot Air / Nitrogen SMT Reflow Oven | JUKI RS-800 Eight Zone
- Category: Reflow Ovens
- Manufacturer: juki
Lead Free, ECO Friendly Hot Air / Nitrogen Reflow Soldering Oven
The RS Ovens Efficient power design and air management system greatly improves energy savings while lowering carbon emissions.
- Independent Air Velocity Controlling System
- Cooling Configuration Recycles to reduce Thermal loss
- Efficient Power Design and Air Management System
- Every Machine Equipped with Industry Standard Features
About the Hot Air / Nitrogen SMT Reflow Oven | JUKI RS-800 Eight Zone
JUKI's RS 800 8-zone reflow-soldering oven embodies the best compromise between cost and effectiveness, floor space and energy consumption. With its 8 zones even complex soldering profiles can be constructed. 2 cooling zones ensure a suitable cooling down of the printed circuit boards after the soldering process.- Best compromise between floor space, energy consumption and flexibility during profile construction.
- Very good thermal properties (∆T Crossprofile < ±2 °C).
- Low energy consumption as well a short warm-up period.
- Available as a nitrogen oven, with a dual lane or with a large printed circuit board width.
- Soldering flux deposit due to a condensate trap, optional with nitrogen.
- Numerous useful functions already incorporated without extra charge.
- 3-year warranty on ventilators and heating elements.
Process Characteristics
- Number of Heating Zones 8
- Number of Cooling Zones 2
- Total heated length 3,120 mm
- Total cooled length 800 mm
- Temperature Range Heating Zones 20 – 300 °C
- High-Temp-Option (up to 350 °C) optional
- Separate Top and Bottom control of temperature
- Blower Fan top and bottom
- Blower Fan frequency separately controllable in zones
- Warm-up time approx. 35 Min.
- Nitrogen Option optional
- External Water Cooling for flux residue standard with nitrogen ovens
- ∆T Crossprofile < ±2 °C
PCB handling and transport
- PCB width min. 50 mm / max. 460 mm
- PCB space top 25 mm / bottom 30 mm
- Conveyor speed range 30 – 200 cm / min
- 610 mm PCB width option
- Transport of PCB on Mesh / Pin conveyor chain
- Centre Board Support optional
- Conveyor direction Righ-Left optional
Machine properties and dimensions
- Dimensions (L × W × H) 5,380 × 1,320 × 1,505 mm
- Weight 2,400 kg
PC and Software
- Operating System Windows 10
- Interfaces Ethernet, USB, SMEMA, Cogiscan IFSNx / TTC
Operating Requirements
- Voltage Supply 400 V / 3 Phasen
- Average power required during warm-up 30 kW / 9 kW
- Exhaust Volume 2 × 10 m³ / min
- Nitrogen (optional) 5 bar
- Operating Environments 5 – 40 °C, 20 – 65 % RH
Standards (selection)
- Automatic chain oiling system, UPS, Board-Drop / Jam-Alarm, On-Off-Timer, 3 years of a JUKI warranty (incl. blower fans / heating elements)
Available options and accessories (selection)
- Dual lane configuration, automatic setting of conveyor width and CBS position