All-In-One Pick and Place PCB Mounter | JUKI RS-1XL

About the All-In-One Pick and Place PCB Mounter | JUKI RS-1XL

With maximum speed up to 42,000CPH (Optimum) and 29,000CPH (IPC9850), the RS-1XL is designed for maximum throughput. The RS-1XL supports components from 0201 metric (008004") up to 74mm square and 50mm x 150mm rectangular parts for maximum flexibility.

New generation of electrical feeders of the type RF

As with the normal RS-1 / RS-1R, the RF feeders are used with the RS-1XL. Due to its compact design, up to 112 feeders can be used on the machine.

Larger board width

The RS-1XL processes circuit boards up to 650 (length) x 560 mm (width) in size. There can be 3 circuit boards in the machine, one in the waiting position at the entrance, one in the assembly and one in the exit. This optimizes a cycle time.

High flexibility – chip shooter and mounter in one machine

The RS-1 family is featured with the unique TAKUMI (Japanese for "master") placement head. In the case of small components, this lowers down to a distance of 1 mm onto the circuit board. This minimizes the travel of the individual placement heads (8 pieces) and enables the decisive speed advantage when assembling the smallest components, which are usually represented in large numbers on the circuit board. For larger components, the TAKUMI placement head increases the distance to the circuit board. The setting at which height the placement head is located is determined by the opting algorithm in the programming software. With several RS-1 machines in a line in particular, the components on the circuit board are always used to optimize the machines so that they are fully utilized with the fastest possible assembly.