Solder Recovery System – EVS 8K/10K
- Category: Solder Recovery Systems
- Manufacturer: EVS International
The new EVS 8K and 10K range has the capacities for single operation dedrossing of even the largest wave soldering machines. Its large integrated hopper makes rapid transfer of dross both simpler and safer, and speeds dedrossing times by up to 75 percent. This provides a cleaner wave with less maintenance, less downtime, and a reduction in shorts and bridging as well as the potential to discontinue the use of messy wave oils and/or dross reduction powders.
About the Solder Recovery System – EVS 8K/10K
The NEW EVS 8K/10K Range have been redesigned and upgraded but still all of the recovery performance of the standard and lead free solder units. The new cart design has a smaller size and footprint help reduce the cost, but still provide a capacities of 20lb/10kg and 40lbs/20kg of dross, giving a rapid payback and impressive return on capital (ROI).
The EVS 8K/10K is the new version of the EVS 7000 /9000 redesigned having taken cognisance of extensive feedback from our distributors and customers worldwide.
Complete with Top extraction to maximize the extraction of gas and smoke, new chassis with separated control section and pull out drawer for the power, and separated control and pneumatics sections + out side view of air pressure.
New Four wheeled highly manoeuvrable cart, pull out drawers for both stand alone filter and dross bucket to facilitate easy change out of filters and bucket replacement.
Redesigned Standard Stand Alone Filter with bigger more flexible hoses and High flow Combination filter that replaces the first three filters in the filter stack [four filters down to two] reducing filter change out by up to 90+% and therefore maintaining the airflow over the same extended time scale.
The new pull out tray for the solder ingot tray and also the new solder ingot trays have a handle at each end.
Other upgrades include:
- Upgraded Software to improve control and service prompts.
- Pull out tray for filter box and dross bin.
- Air knife for dross chute.
- Sealed sides of internal machine for cleaner operation.
- All electronics moved to rear sealed section of the machine for ease of service access.
- Redesigned dross handling chutes with pull out drawer for the dross buckets/bin.
Benefits:
- RAPID ROI (Return on Investment) (Months Not Years)
- Recovers 50-80% pure solder from dross.
- Saves up to 50% in solder costs.
- Reduces dross off site by up to 80%.
- Reduces de-drossing time by up to 85%.
- Self-contained process reduces handling of dross.
- Uses no chemicals, additives or toxic substances.
- ISO14001 - EVS helps you attain & retain accreditation
EVS Solder Recovery Systems Help You
- Improve wave solder machine effectiveness by reducing shorts. Less rework = more profit.
- Clean up your process. No need for dross-reducing powders or wave oils or nitrogen
- Dramatically Reduce Nitrogen consumption.