SMT/THT Hybrid Placement Machine | JUKI JM100
- Category: Pick & Place Equipment
- Manufacturer: juki
Multi Task Platform – SMT/THT Hybrid Placement Machine
The JM100 automates the manual insertion process and is the advanced model for larger/heavier components and larger boards.
- Best in class speed. Component insertion time down to 0.6 seconds for vacuum nozzle and 0.8 seconds for gripper nozzle.
- New “Takumi head” with multiple recognition heights
- Component Feeding
- Line control using JaNets software
About the SMT/THT Hybrid Placement Machine | JUKI JM100
- Placement or Insertion of Surface Mount & Through-Hole Components
- Widest Component Range in the Electronics Industry
- Accommodates Multiple Types of Feeders
- Hybrid SMT and Through Hole Placement Machine; Compact Footprint - Advanced model for larger/heavier components and larger boards
- 6 Nozzles per Gantry - Specialty nozzles for a wide variety of applications.
- Through Hole Placement - Lead Tip Centering
- Lead Orientation Detection - The laser sensor is ideal for lead tip detection leading to improved insertion process.
- Radial Feeders (MRF) - MRF-S/MRF-L, or snap-in MRF-LF
- Bowl Feeders (MBF) - MBF (Fixed), MBF-C (Trolley) or MBF-L (for large components)
- High Accuracy Low Noise Ball Screw Drive
- High Accuracy Laser Align Component Centering - Laser sensor integrated into placement head
Multi Task Platform JM-100 Specifications: | ||||
---|---|---|---|---|
Standard specification (Lsize PWB) | Clinch specification (Lsize PWB) | |||
With using Clinch unit | Without using Clinch unit | |||
Board Size | 1 time clamping | 50㎜×50㎜~410㎜×360㎜ | 80㎜×100㎜~410㎜×360㎜ | 80㎜×50㎜~410㎜×360㎜ |
2 times clamping | 50㎜×50㎜~800㎜×360㎜ | 80㎜×100㎜~800㎜×360㎜ | 80㎜×100㎜~800㎜×360㎜ | |
PCB Weight | max.4kg | |||
Component Height | max.30㎜ | |||
Component Size | Laser recognition | 0603~□50mm | ||
Vision recognition | □3mm~□50mm | |||
Insertion Speed (Insertion components) | Vacuum | 0.6 sec/part*1*3*4 | ||
grip | 0.8 sec/part*2*3*4 | |||
Placement Accuracy (SMT) | Laser recognition | ±0.05mm(3σ) | ||
Vision recognition | ±0.04mm |
- * 1 Specification conditions (Applicable part: Aluminum electrolytic capacitor (φ 8 mm), Feeder: two MRF-S, Placement conditions: Simultaneous pick, sequential insertions using 2 nozzles)
- * 2 Specification conditions (Applicable part: Connector (4 pin), Insertion conditions: 2 sequential picks and insertions using 2 nozzles)
- * 3 Board transfer and mark recognition time not included.
- * 4 When the part height is 16 mm.