Skid Nitrogen Generator N2 GEN S
- Category: Nitrogen Generators
- Manufacturer: South-Tek Systems
The Skid Series Nitrogen Generator is designed to produce flow rates of 35,000+ SCFH
A PSA (Pressure Swing Adsorption) system designed for high purity Nitrogen applications. The system has the capability of generating Nitrogen with purities from 95% up to 99.999%.
Make your own Nitrogen and never wait for a delivery again.
- Duplexing options are available
- Optional turnkey package includes dedicated air compressor, dryer and/or booster
About the Skid Nitrogen Generator N2 GEN S
N2-GEN® S Series is more cost-effective than purchasing & maintaining either banks of N2 cylinders or N2 liquid bulk storage tanks. In most cases, up to 90% in N2 cost savings.
PSA TECHNOLOGY
- The air contains 79% Nitrogen; our systems mechanically filter out the other gases, concentrating the N2 into a storage tank for your process usage.
- Clean, dry compressed air enters one of the two adsorption vessels, containing Carbon Molecular Sieve (CMS).
- Smaller oxygen and residual molecules (H2, He, etc), are absorbed into the CMS, allowing the larger Nitrogen molecules to pass through into a storage tank for later process use.
- Upon saturation, the first adsorption vessel releases the oxygen while the second adsorption vessel starts the process again.
NITROGEN
- Inert, clean, dry, non-flammable gas
- Has a true -40o to -70o F dew point
- Does not support the corrosion reaction
- Prevents oxidation of non-metallic components
N2 LIQUID BULK FACTS
- Liquid N2 boils at -320 degrees fahrenheit
- 2% of your tank volume can be lost due to evaporation every 24 hours
- No precise Liquid N2 volume readings from delivery truck when delivered
- Inconvenient, unsafe, and unreliable
- Locked into a gas contract and constantly paying bills
Nitrogen Generators for Electronics Manufacturing
Nitrogen generators are used in electronics manufacturing during soldering processes and to ensure quality products are produced in an inert atmosphere. Nitrogen gas helps prevent oxidation for both selective soldering and convection reflow soldering, while reflow ovens use nitrogen to provide a time and temperature controlled environment for effective soldering of the surface mount components.