Taped Radial Component Lead Former CF-9
- Category: Lead Formers
- Manufacturer: GPD Global
Forms Taped Radial Leaded Components
- Forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. – precisely and repeatedly, in standard and special forms.
- Production rates up to 25,000 components per hour thanks to the variable speed motor. Its two die stations are independently adjustable and feature micrometer scales with display increments to 0.001” (0,025 mm).
- Reduce setup time with quick change tooling and repeatable station settings.
- Built to be rugged with sealed ball bearing shaft assemblies for low maintenance
About the Taped Radial Component Lead Former CF-9
MICROMETER ADJUSTMENT
Display increments to 0.001” (0,025 mm) ± 0.002” (0,05 mm) repeatability. This adjustment allows the operator to quickly set up the CF-9 to the correct setting for forming and/or cutting radial component leads.
COMPONENT FORMING DIES
- precisely manufactured and are available to form two-leaded components with center-tocenter dimensions up to 0.400” (10,16 mm) as well as 3-leaded TO-92 transistors.
- can be ordered to form a wide variety of component shapes. Both common and special configurations can be produced by using CF-9 component forming dies.
- will also work on the GPD CF-10 Loose Radial component Lead Former.