About the Pick & Place Machine -RS1
The consistent further development of the tried-and-tested technologies from the RS-1 opens up new, outstanding possibilities:
- Even faster assembly of smallest chips (0201 metric) up to large components of 50 x 150 mm or 74 mm edge length for square components. The base frame of the RS-1R pick & place machine has been completely redesigned for this purpose.
- The unique Takumi head covers even more different component heights and thus achieves a decisive speed advantage. The 360° visual component recognition allows the secure detection of user-specific polarity marks.
- Thanks to the RFID integration in the nozzles, these can be traced back completely together with the components and boards.
- This pick and place machine combines the features of a chip shooter with a mounter for large components.
- The purchase of each special machine type for it eliminates as well as change of placement head.
Model | RS-1R |
---|
Conveyor specification | standard | 150mm conveyor extensions,
upstream and downstream | 250mm conveyor extensions,
upstream and downstream |
---|
Board size | minimum | 50×50㎜ |
---|
maximum | 1 buffer | 650×370 ㎜ (Single clamping) |
---|
950×370 ㎜ (double clamping) | 1,100×370 ㎜ (double clamping) | 1,200×370 ㎜ (double clamping) |
3 buffers | 360×370㎜ | 500×370㎜ | 600×370㎜ |
---|
Component height | 25㎜ |
---|
Component size | 0201*1 ~□74 ㎜ /150×50 ㎜ |
---|
Placement speed | Optimum | 47,000CPH |
---|
IPC9850 | 31,000CPH |
---|
Placement accuracy | ±35μm(Cpk≧1) |
---|
Vision recognition | ±30μm |
---|
Feeder inputs | max.112*2 |
---|
*1 For metric 0201 compliance please contact us.
*2 Using RF(RF08AS) feeders