NS-13S (NovaSelect) Series
- Category: Selective Soldering Equipment
- Manufacturer:
NovaSelect Series is an economical, compact selective solder system providing the convenience and flexibility of single point, drag, and mini-wave soldering. Ideal for low volume/high mix through hole soldering requirements, the system includes: Spray Fluxer, Bottom-side Preheat, and Lead/Lead Free Solder Pot, and is Nitrogen ready. Options include Topside Preheat, along with a wide assortment of nozzles.
Prototyping – Product Development – Short Run, High Mix Applications
- System includes: Spray Fluxer, Bottom-side Preheat & Lead/Lead Free Solder Pot with Nozzle.
- Through-hole soldering flexibility – single point, drag, mini-wave, or dip soldering.
System Features
- Easy to use Windows based operating software
- Programming with Gerber Import
- Windows Laptop Included
- Topside Pre-Heat Option
- Witness Camera Option
- Wide Nozzle Assortment
- Nitrogen Ready (Nitrogen supplied by customer)
- Ease of Operation, small footprint, & durable construction
About the NS-13S (NovaSelect) Series
Options- Nitrogen Generator System
- Witness Camera Option
- Topside Pre-heat Option
- Custom Nozzles
- Custom Board Pallets
- Optional Stand
| Max board size | 330mm x 330mm (13" x 13") |
| Min. Neighbor Component Clearance | 1.5-3mm (0.06"-0.12") depending on nozzle size |
| Preheater | |
| Solder Capacity | Approximately 15 lbs. |
| Pressure (Nitrogen) | 2 bar (30 psi) |
| Flux System | Micro Spray |
| Solder Pot and Pump | |
| Warm up Time | 30 minutes |
| Max Temperature | 320°C (608°F) |
| Consumption (Nitrogen) | 0.8-1.7 CFM (23-49 liters/min) dependent on nozzle |
| Air Pressure | 5.5 bar (80 psi) |