Lead Forming Machine for Axial Components For Vertical Mounting – C044 & C044/S

About the Lead Forming Machine for Axial Components For Vertical Mounting – C044 & C044/S

Designed to cut and form the leads of loose axial components for vertical mounting. A variety of form shapes are available through the use of interchangeable die sets. Set up adjustments are simple to make and secured to provide accurate forming on every component. Components are hand fed into the tooling with the body positioned between the left die and the bending mandrel. Once in position the foot pedal is depressed and the right lead is clamped securely against the bending mandrel to reduce stress. The die sets are then advanced cutting and forming the leads in one motion. Depending on the form shape any "dimples" required such as "stand offs" are put in the leads at this point. After the leads have been cut and formed the die sets retract and the bending jaws advance to bend the leads to the 1800 configuration. The bending jaws and clamping die then retract and the finished component is ejected.

• C044: lead sizes up to 0.032 inches
• C044/S: lead sizes up to 0.052 inches