High Speed Compact Modular Pick & Place PCB Mounter | JUKI RX-6R/RX-6B
- Category: Pick & Place Equipment
- Manufacturer: juki
Juki’s already reliable technology has evolved to an all new level! The compact RX-6R/RX-6B offers high productivity, flexibility and quality – in a compact footprint.
- Compact Footprint: the width is just 1.25 m
- New head design results in increased placement speed from previous model.
- Replaceable heads allow you to configure a production line best suited to the current requirements.
About the High Speed Compact Modular Pick & Place PCB Mounter | JUKI RX-6R/RX-6B
Prevention of defective PWBs and rapid analysis
An ultra miniature camera built into the head section captures images of component pick and placement in real time. An analysis is run for presence/absence and traceability information can be saved. This unique function prevents defective PWBs and reduces the time for root cause failure analysis. Component upside down: If a component is supplied upside down, an error is displayed and the machine is stopped automatically.
Machine construction for high-speed component placement
High-speed component placement in a very compact footprint: 1.25mm wide. Each machine is equipped with two heads, each with its own LaserAlign sensor. Components are centered on-the-fly between the pick and placement location. Direct travel between the pick and placement enables high speed placement with great accuracy.
Vision recognition technology for high-speed component placement
- Dual cameras enables high speed placement of large and odd-form components
- Dual centering technology: Each head includes a LaserAlign sensor in addition, dual upward looking strobing cameras capture images in high speed for large, fine pitch, or odd-form components.
- Dual centering methods allow the machine to use the fastest and best method for each component type, based on size, shape and design.
Wide component range
The 6 nozzle head supports components from 0402 (01005) up to 33.5mm square and height up to 33mm. The 3 nozzle head supports an even wider variety: from 0402 (01005) chips up to 100mm square or 50mm x 180mm long connectors with height up to 33mm. These heads are designed to handle a wide variety of components from ultra miniature resistors to large ICs or connectors.
Flexibility by changing the head unit
The rear head can be changed between a 6 nozzle head and a 3 nozzle head, giving greater flexibility to configure the production line to according to the current requirements.
PoP (Package on Package) support
3D or package-on-package (PoP) placement is possible using the optional fluxer units. Support for both flux and solder paste is available.
Laser centering technology for high accuracy placement
The machine can recognize components of various shapes: from ultra miniature components such as 0402 (01005) chips ups to 33.5mm square components such as PLCCs, SOPs, BGAs, and QFPs. When the machine recognizes a component, programming is made simplier and variations such as shape, color, and reflection do not matter with LaserAlign technology
RX-6R/RX-6B Pick & Place Machines Specifications:
| Placement speed | Chip : 52,000CPH*2 IC : 14,000CPH*3 |
|---|---|
| Component size | 0402mm(01005 inch) ~ 50mm×50mm*4 0402mm(01005 inch) ~ 100mm×100mm / 50×180mm*5 |
| Board size | Single lane conveyor: 50×50 ~ 610×590 / 905×590(2times clamping) Dual lane conveyor*6: 50×50 ~ 360×250 / 360×450(single lane conveyor specification mode) |
| Head unit | 6×6nozzle head 6×3nozzle head *6 |
- This is applicable to dual-lane production.*6
- Compact footprint : the width is just 1.25m
- Equipped with standard Placement Monitor check function.*1
- Replaceable head allow you to configure a production line best suited to the current repirments.*6
- High-speed component placement using high-speed non-stop vision recognition.*3
- Wide range of components and boards: tall components, large components and large boards.
- Brand new Matrix Tray Sever TR8S improves the component capability and productivity.
- *1 Only available RX-6B 6 nozzle head
- *2 When using RX-6R
- *3 Option
- *4 When using RX-6R/RX-6B 6×6 nozzle head
- *5 When using RX-6B 6×3 nozzle head
- *6 Only available RX-6B