Automatic Rotary Table Depaneling System – DIVISIO 6000
- Category: Uncategorized
- Manufacturer:
A high dynamic depaneling system for maximum output. The module units are split in the following processes: “depaneling”, “final assembly” and “feeding next process”. By this it is possible to adapt to speed or process applications.
About the Automatic Rotary Table Depaneling System – DIVISIO 6000
The DIVISIO 6000 combines depaneling with final assembly processes on a very small footprint. Due to the parallel working of the two carbon axes, a cycle time of less than 2.5 seconds per individual circuit is achieved. Adapted to the customer-specific processes, either a shuttle system or a rotary table is used. Customer-specific assembly, testing and machining processes are integrated.
The cut curcuits will be laid down on the centrally placed turntable by the carbon-fibre-axis in the front. The "final assembly" is carried out on the turntable. At the same time the second carbon-fibre-axis takes the finished circuits at the other side of the table and sorts them into a freely choosable outlet.
By using parallel processes the DIVISIO 6000 can run optimum cycle times.
ADVANTAGES
- Short changeover times - The quick-change adapter system equips product-specific product carriers in the shortest time
- High efficiency - Two circuits are simultaneously routed and placed on the transport system with the double gripper
- Short cycle times - Carbon axles working simultaneously enable cycle times of less than 2.5 seconds per individual circuit
- Small footprint - Integrated control cabinet reduces footprint and shortens installation time
FEATURES
- 2 carbon-fibre handling axis
- Linear motors for highest dynamics and accuracy
- Ionisation unit
- Segmental inlet
- Quick exchange of gripper finger
- Automatic tool change
- Complete tool management
- Breakage control
- Length verification
- Diameter check
- Life span monitoring
- Dynamic utilization of full router bit
- Automatic maintenance schedule