Contact Us

Automatic Netlist Generation Software – ConvertPLUS ARE™

ConvertPLUS ARE (Automated Reverse Engineering) is a full-featured, CAM software solution designed to complement ScanCAD’s family of scanner-based reverse engineering products.

Description

About the Automatic Netlist Generation Software – ConvertPLUS ARE™

ConvertPLUS ARE takes Gerber and ASCII component data from the scanning process and creates rich netlists such as IPC-D-356A, IPC-258, ODB++ and other outputs that include the component pin numbering and footprint information needed for CAD upload and schematic generation.

Highlights

  • Accepts Gerber and Drill data from ScanFAB and Centroid and BOM from the PLACE Module for ScanFAB
  • Creates component pin numbering & footprints
  • Outputs include: ODB++, ODB++ (X), IPC-D 356 IPC-2581, Fabrication Drawings, FATF, ASCII
  • Special macro to convert Gerber files to ScanCAD-ready files for import
  • HyperNETLIST Extraction can generate Netlist information for even the largest of designs in a matter of minutes
  • Import Wizard that loads ALL industry standard formats (Gerber, Drill, Mill, HPGL, DXF, and more)
  • Database Navigator provides quick and easy access to all necessary information without the need for menus or toolbars
  • Documentation suite provides the ability to create fabrication drawings with automatic dimension and hole chart generation, plus standard drawing notes and title blocks

Analysis Features

  • Graphical Netlist Comparison in support of ScanFAB's Flying Probe Test (FPT) independent netlist validation
  • Pin-Point Netlist Errors (Quickly Locates Short and Open Errors from Netlist Comparison Results)
  • Highlight the Location and Browse Errors Directly from Navigator.
  • Graphical Find Duplicates.
  • Graphical Layer Compare (Compare Any Two Layers Quickly and Accurately, Browse Differences Through the Navigator)
  • Design Information Queries (Quickly check Min. Air Gap, Min. Trace Width, Number of Conductive Layers, Number of Drill Hits, and More)
  • DRC w/AutoCorrect (Track-to Track, Track-to Pad, Pad-to-Pad, Min. Track, Min. Pad, Board Edge, and More)

Basic Features:

  • Single file, 32-Bit “Intelligent” Database Structure
  • High Speed Graphics & Integrated Printing
  • 999 Layers, 9999 Apertures
  • Polygon Support (POEX/POIN, G36/G37)
  • Compositing (Pos & Neg Merging, Paint & Scratch)
  • Import Wizard (Detects Gerber, Drill, Mill, HPGL, DXF, and other formats.
  • Automatic Aperture and NC Tool List Converter
  • Gerber 274D and 274X Import & Export
  • MDA AutoPlot Import (Fire9XXX, Cymbolic Sciences)
  • Barco DPF Import
  • NC Data Import (Support for Excellon, Sieb & Meyer)
  • DXF Import & Export
  • HPGL, HPGL/2 Import & Export
  • ODB++ Import and Export
  • OffSpring Import and Export (Support for IPC-2581)
  • Bitmap Out (Windows BMP, B&W, Color, up to 1000dpi)
  • IPC-D-350 Export, CAM350 Import
  • Editing Capabilities (Move, Copy, Delete, Rotate, Mirror,etc,.)
  • Adding Capabilities (Flash, Line, Arc, Circle, Rectangle, Polygon, Text, and More)
  • IPC-D-356 & 356A Netlist Import and Export

Advanced Features

  • Database Navigator (Quick Access to Layers, Apertures, Netlists)
  • Layer Sets (Define Layer Sets for Blind & Buried Vias and MCM Stack-Up)
  • Interactive Data Grouping (Group Objects Together for Fast and Easy Editing)
  • HyperNETLIST Extraction (Supports SMT, Thru-Hole, Blind & Buried, and MCM)
  • Layer Scaling
  • Merge Multiple PCB Files
  • Automatic Draw-to-Flash Conversion (Convert All Layers at once, Use Mask Layer as Guide, and More)
  • Print generation including high resolution bitmap export

Automatic Reverse Engineering

  • Integrated Footprint Library: Control "master" footprints, device creation & association and pin numbering
  • Parts: Identify, delete, query, BOM report
  • Fiducials: Identify and report
  • Analysis: Device spacing, centroid, comparison and BOM compare
  • BOM Import: Finalize reverse engineering with part numbers, device descriptions, values, and tolerance data

Automatic Netlist Generation Software – ConvertPLUS ARE™ Quick contact

    Red star = required